NAME
sg_rmsn - sends a SCSI READ MEDIA SERIAL NUMBER command
SYNOPSIS
sg_rmsn [--help] [--raw] [--verbose] [--version] DEVICE
DESCRIPTION
Send a SCSI READ MEDIA SERIAL NUMBER command to DEVICE and outputs the response.
This command is described in SPC-3 found at www.t10.org . It was originally added to SPC-3 in revision 11 (2003/2/12). It is not an mandatory command and the author has not seen any SCSI devices that support it.
OPTIONS
Arguments to long options are mandatory for short options as well.
| -h, --help | output the usage message then exit. |
| -r, --raw | sends the serial number (if found) to stdout. This output may contain non-printable characters (e.g. the serial number is padded with NULLs at the end so its length is a multiple of 4). The default action is to print the serial number out in ASCII-HEX with ASCII characters to the right. All error messages are sent to stderr. |
| -v, --verbose | |
| increase the level of verbosity, (i.e. debug output). | |
| -V, --version | |
| print the version string and then exit. | |
NOTES
Device identification information is also found in a standard INQUIRY response and its VPD pages (see sg_vpd). The relevant VPD pages are the "device identification page" (VPD page 0x83) and the "unit serial number" page (VPD page 0x80).
The MMC-4 command set for CD/DVD/HD-DVD/BD drives has a "media serial number" feature (0x109) [and a "logical unit serial number" feature]. These can be viewed with sg_get_config.
EXIT STATUS
The exit status of sg_rmsn is 0 when it is successful. Otherwise see the sg3_utils(8) man page.
AUTHORS
Written by Douglas Gilbert.
REPORTING BUGS
Report bugs to <dgilbert at interlog dot com>.
COPYRIGHT
Copyright © 2005-2008 Douglas Gilbert This software is distributed under a FreeBSD license. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
SEE ALSO
sg_vpd(sg3_utils), sg_get_config(sg3_utils)
