." make the size of the head bigger
\$*
\$1
\l’75u’
Name
swat - Samba Web Administration Tool
Synopsis
| \FCswat\F[] [-s <smb config file>] [-a] [-P] | |
DESCRIPTION
This tool is part of the samba(7) suite.
\FCswat\F[] allows a Samba administrator to configure the complex smb.conf(5) file via a Web browser. In addition, a \FCswat\F[] configuration page has help links to all the configurable options in the \FCsmb.conf\F[] file allowing an administrator to easily look up the effects of any change.
\FCswat\F[] is run from \FCinetd\F[]
OPTIONS
-s smb configuration file
The default configuration file path is determined at compile time. The file specified contains the configuration details required by the smbd(8) server. This is the file that \FCswat\F[] will modify. The information in this file includes server-specific information such as what printcap file to use, as well as descriptions of all the services that the server is to provide. See \FCsmb.conf\F[] for more information.
-a
This option disables authentication and places \FCswat\F[] in demo mode. In that mode anyone will be able to modify the \FCsmb.conf\F[] file.
WARNING: Do NOT enable this option on a production server.
-P
This option restricts read-only users to the password management page. \FCswat\F[] can then be used to change user passwords without users seeing the "View" and "Status" menu buttons.
-d|--debuglevel=level
level is an integer from 0 to 10. The default value if this parameter is not specified is 0.
The higher this value, the more detail will be logged to the log files about the activities of the server. At level 0, only critical errors and serious warnings will be logged. Level 1 is a reasonable level for day-to-day running - it generates a small amount of information about operations carried out.
Levels above 1 will generate considerable amounts of log data, and should only be used when investigating a problem. Levels above 3 are designed for use only by developers and generate HUGE amounts of log data, most of which is extremely cryptic.
Note that specifying this parameter here will override the \m[blue]log level\m[] parameter in the \FCsmb.conf\F[] file.
-V
Prints the program version number.
-s <configuration file>
The file specified contains the configuration details required by the server. The information in this file includes server-specific information such as what printcap file to use, as well as descriptions of all the services that the server is to provide. See \FCsmb.conf\F[] for more information. The default configuration file name is determined at compile time.
-l|--log-basename=logdirectory
Base directory name for log/debug files. The extension ".progname" will be appended (e.g. log.smbclient, log.smbd, etc...). The log file is never removed by the client.
-h|--help
Print a summary of command line options.
INSTALLATION
Swat is included as binary package with most distributions. The package manager in this case takes care of the installation and configuration. This section is only for those who have compiled swat from scratch.
After you compile SWAT you need to run \FCmake install \F[] to install the \FCswat\F[] binary and the various help files and images. A default install would put these in:
o
| o | /usr/local/samba/sbin/swat |
o
| o | /usr/local/samba/swat/images/* |
o
| o |
/usr/local/samba/swat/help/*
|
Inetd Installation
You need to edit your \FC/etc/inetd.conf \F[] and \FC/etc/services\F[] to enable SWAT to be launched via \FCinetd\F[].
In \FC/etc/services\F[] you need to add a line like this:
\FCswat 901/tcp\F[]
Note for NIS/YP and LDAP users - you may need to rebuild the NIS service maps rather than alter your local \FC /etc/services\F[] file.
the choice of port number isn't really important except that it should be less than 1024 and not currently used (using a number above 1024 presents an obscure security hole depending on the implementation details of your \FCinetd\F[] daemon).
In \FC/etc/inetd.conf\F[] you should add a line like this:
\FCswat stream tcp nowait.400 root /usr/local/samba/sbin/swat swat\F[]
Once you have edited \FC/etc/services\F[] and \FC/etc/inetd.conf\F[] you need to send a HUP signal to inetd. To do this use \FCkill -1 PID \F[] where PID is the process ID of the inetd daemon.
LAUNCHING
To launch SWAT just run your favorite web browser and point it at "http://localhost:901/".
Note that you can attach to SWAT from any IP connected machine but connecting from a remote machine leaves your connection open to password sniffing as passwords will be sent in the clear over the wire.
FILES
\FC/etc/inetd.conf\F[]
This file must contain suitable startup information for the meta-daemon.
\FC/etc/services\F[]
This file must contain a mapping of service name (e.g., swat) to service port (e.g., 901) and protocol type (e.g., tcp).
\FC/usr/local/samba/lib/smb.conf\F[]
This is the default location of the smb.conf(5) server configuration file that swat edits. Other common places that systems install this file are \FC /usr/samba/lib/smb.conf\F[] and \FC/etc/smb.conf \F[]. This file describes all the services the server is to make available to clients.
WARNINGS
\FCswat\F[] will rewrite your smb.conf(5) file. It will rearrange the entries and delete all comments, include= and copy= options. If you have a carefully crafted \FC smb.conf\F[] then back it up or don't use swat!
VERSION
This man page is correct for version 3 of the Samba suite.
SEE ALSO
\FCinetd(5)\F[], smbd(8), smb.conf(5)
AUTHOR
The original Samba software and related utilities were created by Andrew Tridgell. Samba is now developed by the Samba Team as an Open Source project similar to the way the Linux kernel is developed.
The original Samba man pages were written by Karl Auer. The man page sources were converted to YODL format (another excellent piece of Open Source software, available at ftp://ftp.icce.rug.nl/pub/unix/) and updated for the Samba 2.0 release by Jeremy Allison. The conversion to DocBook for Samba 2.2 was done by Gerald Carter. The conversion to DocBook XML 4.2 for Samba 3.0 was done by Alexander Bokovoy.
