NAME
sensors - print sensors information
SYNOPSIS
sensors [ options ] [ chips ] sensors -s [ chips ] sensors --bus-list
DESCRIPTION
sensors is used to show the current readings of all sensor chips. sensors -s is used to set all limits as specified in the configuration file. sensors --bus-list is used to generate bus statements suitable for the configuration file.
OPTIONS
-c config-file | Specify a configuration file. If no file is specified, the libsensors default configuration file is used. Use -c /dev/null to temporarily disable this default configuration file. |
-h | Print a help text and exit. |
-s | Evaluate all set statements in the configuration file and exit. You must be root to do this. If this parameter is not specified, no set statement is evaluated. |
-A | Do not show the adapter for each chip. |
-u | Raw output. This mode is only meant for debugging. |
-v | Print the program version and exit. |
-f | Print the temperatures in degrees Fahrenheit instead of Celsius. |
--bus-list | Generate bus statements suitable for using in sensors.conf. Such bus statements are only needed if you have several chips sharing the same address on different buses of the same type. As bus numbers are usually not guaranteed to be stable over reboots, these statements let you refer to each bus by its name rather than numbers. |
FILES
/etc/sensors3.conf
/etc/sensors.conf
The system wide configuration file. See sensors.conf(5) for further details.
SEE ALSO
AUTHOR
Frodo Looijaard and the lm_sensors group http://www.lm-sensors.org/